Nashville's Water Filtration — Middle Tennessee (615) 576-8678 Free Estimate
Home Water Testing Whole-Home Filtration Water Softeners Reverse Osmosis Well Water Treatment Service, Filters & Salt Service Area On Tap About Get a Free Estimate

Water Filtration · Nashville, TN

Reading a Water Hardness Number: mg/L and Grains

A hardness test comes back as a number, sometimes in milligrams per liter and sometimes in grains per gallon, with a label that depends on whose scale is used. Here is how to convert it and where Nashville’s water sits.

We respond immediately Licensed and insured local crews Free, no-obligation estimates

· by Michael Blair, Nashville's Water Filtration

Hard water is easy to spot: a white film on glasses, scale around the faucet, soap that will not lather. The number behind it is harder to read. A test kit, a utility report and a softener salesman can all describe the same water in different units, and call it soft, moderately hard or hard depending on whose scale they use. Our water testing service gives you the number for your own tap; this post is about reading it once you have it, and about where Nashville’s city water sits.

How do you convert mg/L to grains per gallon?

Divide the milligrams per liter by 17.1. Metro Water Services prints that factor in its 2025 Consumer Confidence Report: a hardness of 17.1 mg/L, which is the same as 17.1 parts per million, equals one grain per gallon. So 100 mg/L is just under 6 grains, 171 mg/L is 10 grains, and going the other way, a softener set to 8 grains is treating water of about 137 mg/L. Those are conversions, nothing more.

Lab results are usually in mg/L. Softener settings, test strips sold for softeners and most softener sizing are in grains per gallon. Converting before you compare saves a lot of confusion, because the same water reads as roughly 100 in one unit and 6 in the other.

Where does Nashville’s city water fall on the hardness scale?

In the moderately hard band, by Metro’s own description and by the U.S. Geological Survey’s scale. Metro’s 2025 Consumer Confidence Report gives total hardness as 100.5 mg/L, with a range of 88.5 to 128.4, in a table marked as 2023 data, and its text calls Nashville’s water moderately hard. Dividing by 17.1, that average is about 5.9 grains per gallon; the conversion is ours, not a figure Metro publishes. The USGS Water Science School page on hardness puts 61 to 120 mg/L in its moderately hard band, with 121 to 180 as hard.

The labels do not all agree. The table printed in the same Metro report runs medium hard from 50 to 100 mg/L and hard from 100 to 200, which would put an average of 100.5 right on the line. When one source says moderately hard and another says hard about the same water, they are using different scales, not measuring different water. The number is what matters.

Metro’s report also explains where the hardness comes from: mostly dissolved calcium, picked up by the Cumberland River from limestone in Tennessee and eastern Kentucky, and its treatment process does not remove it. Our post on what is actually in Nashville water covers the rest of the report.

Why do two Metro reports give different hardness numbers?

Because they measure different things in different years. Metro’s separate 2025 Water Quality Report lists hardness as calcium at 75.3 mg/L, with a range of 63.9 to 92.6. That is calcium hardness only, for 2025, while the 100.5 figure above is total hardness from 2023 data. The Consumer Confidence Report’s own 2023 table lists calcium hardness separately as 79.5 mg/L.

If you are comparing a test result with Metro’s numbers, check which measure your test reports and compare like with like: total with total, calcium with calcium. Neither report sets a legal limit; both list the maximum contaminant level for hardness as not established.

What to do with your own number

Start with a test of your own tap, because the city figures are averages across a system and a range, and a house on a private well is a different question entirely; our well water page covers that. The USGS page points the same way: for a local hardness figure, it sends readers to the local water utility or health agency, or to a water softener company.

Once you have the number in grains per gallon, you can decide whether the spots on the glasses and the scale on the fixtures are worth treating, and size a water softener to the real figure rather than a guess. If you are in Nashville or nearby and want the test done, ask us to test your water and we will go through the result with you.

  • Grains per gallon = mg/L divided by 17.1
  • Metro total hardness: 100.5 mg/L average, 2023 data, about 5.9 grains
  • Metro calls it moderately hard; its own table prints 100 to 200 mg/L as hard
  • Compare total hardness with total, calcium with calcium

Sources

FAQ

Reading a Water Hardness Number: mg/L and Grains — questions

Does Nashville have hard water?

Metro Water Services describes Nashville’s water as moderately hard. Its 2025 Consumer Confidence Report lists total hardness at 100.5 mg/L on average, from 2023 data, which is about 5.9 grains per gallon. The hardness is mostly calcium from limestone along the Cumberland River, and Metro’s treatment does not remove it.

Is 6 grains per gallon hard water?

Six grains per gallon is about 103 mg/L. On the U.S. Geological Survey’s scale that is moderately hard, which runs from 61 to 120 mg/L. Metro Water Services’ own table puts 100 to 200 mg/L, or 6 to 12 grains, in its hard band, so the label depends on whose scale you use.

What is the difference between ppm and grains of hardness?

They are two units for the same thing. Parts per million is the same as milligrams per liter, and one grain per gallon equals 17.1 of them, according to Metro Water Services. Lab reports usually use mg/L or ppm, while softener settings and test strips sold for softeners usually use grains per gallon.

Why are there hard water spots on my glasses?

Hard water carries dissolved calcium, and when a drop dries on a glass the water leaves and the mineral stays as a white film. Nashville’s city water is moderately hard, so some spotting is common. A hardness test of your own tap tells you how much calcium you are dealing with before you treat it.

Free estimate

Want your Nashville water tested?

Tell Nashville's Water Filtration what you notice in the water and whether it comes from the city or a well. A written estimate follows, free, and you owe nothing for asking.

Call Chat Free Estimate
Something off with your water?